www.kumarwires.com

Home Profile Products Contact Us Feedback Production Business Query

	Compression Springs
	Torsion Springs
	Extension Springs
	Flat Springs

	Machining Components
	Spring Washer
	Wire Forms
	Other Items

These are shaped wires in Square, Rectangular orTrapezoidal sections and are supplied in Drawn finish/Annealed finish. These wires are used in the manufacture of springs, and spring washers and snap rings.

We have established ourselves as one of the leading manufacturers and exporters of high quality washers. Product range offered by us includes :

Belleville Washers
a conical shaped spring disc

Beveled Washer
a flat washers which can be square or circular with one bearing surface having an oblique angle

F436 Hardened Washers
a steel hardened washers manufactured in accordance with ASTM Standard F436.

Split Lock Washers
a coiled, hardened, split circular washers with a slightly trapezoidal wire section.

Tooth Lock Washers
a hardened circular washers with twisted prongs or teeth protruding from the inside and/or the outer edges of the washers.

Fender Washers
a flat washers with significantly more surface area than a USS or SAE washers, but made from a thinner gauge steel than most flat washers.

Countersunk Finishing Washers
a formed circular washers designed for use with flat or oval head screws Machine Screw Washers
the smallest type of flat washers with an outside diameter equal to slightly twice the size of the inside diameter.

SAE Flat Washers
similar to a USS washers, but with slightly smaller inside and outside diameters and made from thinner materials than USS washers.

		Square 0.6 x 0.9 to 8.0 x 8.0 Rectangular 0.5 x 0.9 to 8.0 x 6.0 Trapeziodal 1.8 x 1.2 to 8.0 x 6.0 Medium washer Spring lock washer Curved spring washers Large outside diameter H.V, high tensile Serrated lock washer Retaining washer for shafts Washer for steel constructions Square taper washer for channels Square washer for wood constructions Retaining ring for shafts Retaining ring for bores Toothed lock washer Plastic washer Washer for self-drilling screws
		They are normally coiled with a constant body diameter. There are other forms of compression springs too, including conical, barrel and hourglass. Round wire is most commonly used for compression springs, but sometimes square, rectangular and special section wire is required. The performance of a compression spring depends on the following factors: Wire size Diameter Number of coils Length Rate End Type Hand Index Stress Spring Nests